大型降落伞拉直过程中的抽打现象分析

针对某大型降落伞回收系统主伞拉直过程中出现的抽打现象进行了分析,根据其拉直过程的特点将其划分为五个阶段,分别建立了各阶段的实体模型和约束模型,通过模型的组合建立了各阶段的多体动力学模型,将各阶段模型连接进一步组成该型号大型降落伞拉直全过程的动力学模型。仿真分析了该型号大型降落伞出现抽打现象时的伞衣位形、顶部伞衣速度、伞绳和伞衣的偏离距离以及张力的变化,总结了抽打现象形成时的一些特征数据,分析结果可为大型降落伞设计、改进、使用等提供参考。     

某型导发架通用测试系统软件复用性设计

测试软件的复用性是摆在测试界面前亟待解决的重要问题。运用统一建模语言(Unified Modeling Language,UML)对测试软件进行建模,包括:测试系统的类图、软件功能分解、功能子系统的上下文模型、测试软件需求特征树以及软件功能子系统的顺序交互视图。在Visual C++6.0环境中,采用"应用程序框架+可复用构件"开发方式,实现了基于可复用构件的某型导发架测试系统应用软件组装,成功解决了导发架测试领域内同一系列产品间测试软件的可复用问题。     

扩张状态观测器的观测误差前馈补偿设计

在"总和"扰动模型未知的前提下,针对线性扩张状态观测器跟踪时变信号精度不高的问题,设计出一种前馈观测补偿器。在分析线性扩张状态观测器观测原理的基础上,通过对扰动项的线性近似、误差系统动态响应的忽略,在时域内推导出观测静差的量化表达式,进而使用扰动微分项的估计值替代真值对观测作前馈补偿。理论分析了替代的可行性,证明了补偿器减小观测误差幅值、超前校正观测相位滞后的作用。将这一补偿思想推广至非线性扩张状态观测器中。通过仿真对补偿器提高观测精度、加快误差收敛的有效性进行检验,实验结果进一步表明,补偿器的引入能显著提高整个自抗扰控制系统的控制精度,从而证明了这种补偿思路的可行性。     

利用RLC电路合成高压方波脉冲

基于过阻尼RLC电路分时放电,提出了一种新型高压方波脉冲产生方法。理论分析表明过阻尼RLC电路产生的双指数电压波与PFL产生的方形电压波具有类似的上升沿和平顶。电路模拟表明通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台400 nF脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明样机可以在250 Ω电阻负载上输出幅值17 kV,平顶宽度330 ns~5.8 μs,上升沿100~ 350 ns 的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

紧凑型Tesla变压器的参数测量

对设计加工研制的Tesla变压器,根据Smith建议的测量方法,解决了对紧凑Teala变压器耦合系数进行比较准确地测量的问题,实测耦合系数高达0.9,并对耦合系数稍低于理论设计值的原因进行了探讨,同时分析给出了物理原因.此外,根据Teala变压器电路在初次级初、次级短路和低电压充电情形下的实测电压波形,估算出Tesla变压器电路各参数数值.这些数值与理论计算值吻合,并能满足实际高压充电的要求.     

内埋式导弹武器安全分离地面试验关键技术

内埋式机载导弹武器在发射过程中需经历复杂发射控制过程,为验证内埋弹射发射安全分离技术,提供了一种地面验证试验方法,给出了试验设计方案,将试验划分为综合对接与地面分离验证两部分,设计了综合对接试验系统,给出了导弹模拟装置原理及组成;设计了地面分离验证系统,讨论了内埋武器舱遮挡导弹遥测信号问题解决办法及试验数据录取方法,设计了试验验证序号流程,为内埋弹射导弹武器发射过程地面验证提供一种技术手段。     

灭火弹比药量与灭火效果关系研究

在相同的试验条件下，对采用鼠笼式结构的灭火弹进行了静爆试验，并对采用不同比药量的灭火剂在爆轰作用下抛撒云团的成长过程和灭火效果进行对比分析，得出比药量与灭火效果的关系，最后确定最佳比药量。     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

新型静电电位动态测试系统的研制

该测试系统主要依据接触式测试法和电压转换测试原理进行测试。通过对该系统的高压线性和频率特性进行校准,达到了设计要求。对人体静电电位进行测试实验,结果显示该测试系统运行稳定,响应速度快,测试数据准确,并可自主进行数据换算和存储。